Cisco SF 200-24P Technical Information download pdf (Page 27)

Managing System Logs

Viewing Memory Logs

Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 19

• Log Server IP Address/Name—Enter the IP address or domain name of the

log server.

• UDP Port—Enter the UDP port to which the log messages are sent.

• Facility—Select a facility value from which system logs are sent to the

remote server. Only one facility value can be assigned to a server. If a second

facility code is assigned, the first facility value is overridden.

• Description—Enter a server description.

• Minimum Severity—Select the minimum level of system log messages to

be sent to the server.

STEP 4 Click Apply. The Add Remote Log Server page

closes, the SYSLOG server is

added, and the Running Configuration file is updated.

Viewing Memory Logs

The switch can write to the following logs:

• Log in RAM (cleared during reboot).

• Log in Flash memory (cleared only upon user command).

You can configure the messages that are written to each log by severity, and a

message can go to more than one log, including logs that reside on external

SYSLOG servers.

RAM Memory

The RAM Memory page

displays all messages, in chronological order, that were

saved in RAM (cache). Entries are stored in the RAM log according to the

configuration in the Log Settings page.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 276 277

No comments

Cisco SF 200-24P Technical Information Page 27