Cisco SF 200-24P Technical Information download pdf (Page 228)

Configuring IP Information

Management and IP Interfaces

Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 218

Defining an IPv6 Default Router List

The IPv6 Default Router List page enables configuring and viewing the default

IPv6 router addresses. This list contains the routers that are candidates to become

the switch default router for non-local traffic (it may be empty). The switch

randomly selects a router from the list. The switch supports one static IPv6 default

router. Dynamic default routers are routers that have sent router advertisements to

the switch IPv6 interface.

When adding or deleting IP addresses, the following events occur:

• When removing an IP interface, all the default router IP addresses are

removed.

• Dynamic IP addresses cannot be removed.

• An alert message is displayed after an attempt is made to insert more than

a single user-defined address.

• An alert message is displayed when attempting to insert a non-link local

type address, meaning 'fe80:'.

To define a default router:

STEP 1 Click Administration > Management Interface (Layer 2) > IPv6 Default Router

List.

The IPv6 Default Router List page opens.

This page displays the following fields for each default router:

• Default Router IPv6 Address—Link local IP address of the default router.

• Interface—Outgoing IPv6 interface where the default router resides.

• Type—The default router configuration that includes the following options:

- Static—The default router was manually added to this table through the

Add button.

- Dynamic—The default router was dynamically configured.

State—The default router status options are:

- Incomplete—Address resolution is in process. Default router has not yet

responded.

- Reachable—Positive confirmation was received within the

Reachable

Time.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 276 277

No comments

Cisco SF 200-24P Technical Information Page 228