Cisco SF 200-24P Technical Information download pdf (Page 162)

Managing Power-over-Ethernet Devices

Configuring PoE Properties

Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 154

Output power is disabled during power-on reboot, initialization, and system

configuration to ensure that PDs are not damaged.

To configure PoE on the switch and monitor current power usage:

STEP 1 Click Port Management > PoE > Properties. The

PoE Properties

page opens.

STEP 2 Enter the values for the following fields:

• Power Mode—Select one of the following options:

Port Limit

—The maximum power limit per each port is configured by the

user.

Class Limit

—The maximum power limit per port is determined by the

class of the device, which results from the Classification stage.

• Traps—Enable or disable a SYSLOG trap.

• Power Trap Threshold—Enter the usage threshold that is a percentage of

the power limit. An alarm is initiated if the power exceeds this value.

The following counters are displayed:

• Nominal Power—The total amount of power the switch can supply to all the

connected PDs.

• Consumed Power—Amount of power currently being consumed by the PoE

ports.

• Available Power—Nominal power - the amount of consumed power.

STEP 3 Click Apply to save the PoE properties.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 276 277

No comments

Cisco SF 200-24P Technical Information Page 162