Configuring Voice Ports
Configuring Digital Voice Ports
VC-57
Cisco IOS Voice, Video, and Fax Configuration Guide
Cisco MC3810 • Digital voice module
(DVM)
• Voice compression
module (VCM3 or
VCM6)
or
• High-compression
module (HCM2 or
HCM6)
VCM3 and VCM6 do not
support codec complexity
options.
1—
Cisco AS5300 One Octal T1/E1 feature card
(eight ports) or one Quad
T1/E1 feature card (four ports)
and one or two VFCs for voice
and fax features.
— controller is :
Octal: 0 to 7
Quad: 0 to 3
Cisco AS5800 Up to four 12-port T1/E1 trunk
cards and up to eight VFCs
shelf is 1
slot is 0 to 5
0 to 11
Cisco 7200 series • Two-port T1/E1 enhanced
digital voice port adapters
• PA-VXC (high-capacity)
• PA-VXB (moderate
capacity)
Port adapter slot 0 is reserved
for the Fast Ethernet port on
the I/O controller (if present).
Port adapter slot:
from 1 to 4, or from 1
to 6
Interface port: 0 to 1
Cisco 7500 series PA-VXB and PA-VXC on a
VIP2 or VIP4 in Cisco 7500
series routers
If the VIP is inserted in
interface processor slot 3 and
port adapter slot 0, then the
addresses of the PA-VXB or
PA-VXC are 3/0/0 or 3/0/1
(interface processor slot 3,
port adapter slot 0, and
interfaces 0 and 1).
Interface processor
slot: 0 to 12 (depends
on the number of slots
in the router)
Port adapter slot:
always 0 or 1
Interface port: 0 or 1
Table 8 Digital Voice Slot/Port Designations (continued)
Router Platform Voice Hardware Slot Number Port Number
Comments to this Manuals