Cisco Catalyst 6880-X Specifications Page 20
- Page / 111
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Access Layer April 2014
17
Cisco Catalyst 2960-S Series and 2960-X Series are fixed-configuration, stackable, 10/10/1000 Ethernet
switches, with PoE+ and non-power-supplying versions designed for entry-level enterprise, midmarket, and
remote site networks.
• Cisco FlexStack is implemented by adding a stacking module to the Cisco Catalyst 2960-S Series
Switch. This enables up to four Catalyst 2960-S Series Switches to be stacked together. Cisco
FlexStack links are full duplex 10-Gbps links with typical recovery time between 1–2 seconds.
• Cisco FlexStack+ is implemented by adding a stacking module to the Cisco Catalyst 2960-X Series
Switch. This enables up to eight Catalyst 2960-X series switches to be stacked together. Cisco
FlexStack+ links are full duplex 20-Gbps links with typical recovery time between 1-2 seconds. When
2960-X switches are included in a stack with 2960-S, stacking capabilities are limited to the capabilities
of the 2960-S FlexStack modules.
Cisco Catalyst 3750-X Series are fixed-port, stackable, 10/100/1000 Ethernet switches, with PoE+, Cisco UPOE,
and non-power-supplying versions, which provide enhanced resiliency through StackWise Plus and StackPower
technologies.
• Cisco StackWise Plus enables up to nine Cisco Catalyst 3750-X Series Switches to be stacked together
using a 64-Gbps stack interconnect with rapid failure recovery.
• Cisco StackPower shares power across the Cisco Catalyst 3750-X Series Switch stack. This allows
the flexible arrangement of power supplies in the stack, and enables a zero-footprint redundant power
supply deployment and intelligent load shedding.
• Cisco 3750-X Series Switches have modular uplinks and support upgrading the Cisco IOS feature set
and enhanced enterprise capabilities like TrustSec, Flexible NetFlow, Medianet, and Cisco IOS Sensor to
ensure that the switch functionality grows as the organization grows.
Cisco Catalyst 3650 Series and Catalyst 3850 Series Switches are fixed-port, stackable, 10/100/1000 Ethernet
switches, with PoE+ and non-power-supplying versions, which provide enhanced switching performance and
resiliency through StackWise-160 (Cisco Catalyst 3650) or StackWise-480 and StackPower technologies (Cisco
Catalyst 3850), with Flexible NetFlow capabilities on all ports.
• Cisco Catalyst 3650 stacking is implemented with an optional stacking module. Switches stack together
using StackWise-160 mode with up to nine switches in single stack-ring.
• Cisco Catalyst 3850 Series Switches have built-in stacking capability, and stack together using
StackWise-480 mode with up to nine switches in single stack-ring.
• Cisco StackPower technology increases system-level resiliency during catastrophic power failure on
a stack-member switch. Cisco StackPower enables power redundancy across a group of four Cisco
Catalyst 3850 Series Switches within same stack. This allows the flexible arrangement of power supplies
in the stack, and enables a zero-footprint redundant power supply deployment and intelligent load
shedding.
• Cisco 3650 Series Switches have fixed uplinks that can be configured as Gigabit Ethernet or 10-Gigabit
Ethernet.
• Cisco 3850 Series Switches have modular uplinks that can be configured as Gigabit Ethernet or
10-Gigabit Ethernet.
• Cisco Catalyst 3650 and Cisco Catalyst 3850 Series supports Stateful Switchover, which allows a switch
in the active role in a stack to rapidly switchover to a switch in the standby role with minimum disruption
to the network.
• With appropriate licenses, the Cisco Catalyst 3650 and Cisco Catalyst 3850 Series hardware supports
wireless LAN controller functionality in order to support a unified access policy for converged wired and
wireless designs.
- Campus Wired LAN 1
- Table of Contents 2
- How to Read Commands 4
- Comments and Questions 4
- CVD Navigator 5
- Prociency 6
- Introduction 7
- Design Overview 9
- Access Layer 11
- Distribution Layer 12
- Flexible Design 13
- Core Layer 14
- Reader Tip 15
- Quality of Service (QoS) 16
- Access Layer Platforms 19
- Deployment Details 21
- Access Layer April 2014 22
- Configuring the Access Layer 23
- Interface 36
- Layer-3 Link 43
- Distribution Layer Roles 45
- Distribution Layer Platforms 47
- Cisco Catalyst 6880-X VSS 49
- Cisco Catalyst 4500-X VSS 49
- Cisco Catalyst 4507R+E VSS 49
- Virtual Switching System 51
- Figure 21 - VSS domain 53
- Figure 22 - VSLP 55
- Figure 23 - VSS domain 61
- Figure 24 - VSLP 63
- Multicast Source 73
- Rendezvous Point 73
- EIGRP Summarization 82
- OSPF Summarization 82
- EIGRP Neighbor Authentication 82
- OSPF Neighbor Authentication 82
- Core Layer Platforms 86
- Figure 28 - VSLP 92
- EIGRP Unicast Routing 102
- OSPF Unicast Routing 102
- Tech Tip 104
- Port channel 105
- CoreDistribution 105
- Appendix A: Product List 107
- LAN Distribution Layer 108
- LAN Core Layer 108
- Appendix B: 109
- DeviceCongurationFiles 109
- Appendix C: Changes 110
- Feedback 111
Related products and manuals for Network switches Cisco Catalyst 6880-X
Network switches Cisco MFEBX1 User Manual
(11 pages)
(11 pages)
Network switches Cisco TrustSec User Manual
(10 pages)
(10 pages)
Network switches Cisco MGBLX1 User Manual
(13 pages)
(13 pages)
© 2020, manymanuals.com. All rights reserved. | 0.197 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals