Cisco Catalyst 6880-X Specifications download pdf (Page 23)

Access Layer April 2014

Configuring the Access Layer

1. Configure the platform

2. Configure LAN switch universal settings

3. Configure access switch global settings

4. Configure client connectivity

5. Connect to distribution or WAN router

PROCESS

Procedure 1 Configure the platform

Some platforms require a one-time initial configuration prior to configuring the features and services of the

switch. If you do not have a platform listed in the following steps, you can skip those steps.

Option 1: Congure the Cisco Catalyst 2960-S, 2960-X, 3560-X, and 3750-X

Step 1: If you are configuring a stack of switches, set the stack master switch. This command does not apply to

the Cisco Catalyst 3560-X Series Switch.

switch [switch number] priority 15

When there are multiple Cisco Catalyst 2960-S, 2960-X, or 3750-X Series Switches configured in a stack, one

of the switches controls the operation of the stack and is called the stack master. When three or more switches

are configured as a stack, configure the stack master switch functionality on a switch that does not have uplinks

configured.

Figure 10 - Stack master placement in a switch stack

2092

Distribution

Switch

Stack Master

Switch Stack

Uplink

If you configure stack master switch priority on a Cisco Catalyst 2960-S, 2960-X, or Cisco 3750-X switch stack,

a single reload is required to force the stack master to operate on the switch that you configured with the highest

priority. Reload the switch stack after all of your configuration is complete for this entire “Configuring the Access

Layer” process.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 110 111

No comments

Cisco Catalyst 6880-X Specifications Page 23