Cisco WPC54GX4 User's Guide download pdf (Page 15)

Chapter 4: Setting Up and Connecting the Wireless-G Notebook Adapter with SRX400

Setting Up the Adapter

Wireless-G Notebook Adapter with SRX400

WPA-Personal for Connection

WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select one of

these methods. Then enter a passphrase.

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down

menu.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.

The longer and more complex your Passphrase is, the more secure your network will be.

Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.

WPA2 - Personal Needed for Connection

AES is automatically used as the encryption method. Enter a passphrase on this screen.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.

The longer and more complex your Passphrase is, the more secure your network will be.

Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.

2. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect

to Network to connect to your network.

Congratulations! Setup is complete.

To check the link information, search for available wireless networks, or make additional configuration

changes, refer to “Chapter 5: Using the Wireless Network Monitor.”

Figure 4-7: WPA-Personal Needed for Connection

Figure 4-9: Congratulations Screen

Figure 4-8: WPA2-Personal Needed for Connection

1 ... 14 15 16 ... 63

No comments

Cisco WPC54GX4 User's Guide Page 15