Cisco WPC54GX4 User's Guide download pdf (Page 20)

Chapter 4: Setting Up and Connecting the Wireless-G Notebook Adapter with SRX400

Setting Up the Adapter

Wireless-G Notebook Adapter with SRX400

WPA Enterprise

WPA Enterprise is used in coordination with a RADIUS server. (This should only be used when a RADIUS server

is connected to the Router.) WPA Enterprise offers two encryption methods, TKIP and AES, with dynamic

encryption keys. It offers two authentication methods, EAP-TLS and PEAP. Select one of these methods and

follow the appropriate instructions below.

EAP-TLS

Server Name - Enter the name of the authentication server (this is optional).

Certificate - Select the certificate you have installed to authenticate you on your wireless network. If you

want to use any certificate, keep the default setting, Trust Any.

Encryption - Select the type of algorithm you want to use, TKIP or AES.

PEAP

Password - Enter the password of your wireless network.

Server Name - Enter the name of the authentication server (this is optional).

Certificate - Select the certificate you have installed to authenticate you on your wireless network. If you

want to use any certificate, keep the default setting, Trust Any.

Inner Authen. - Select the authentication method used inside the PEAP tunnel.

Encryption - Select the type of algorithm you want to use, TKIP or AES.

Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the

previous screen.

Figure 4-18: Wireless Security - WPA Enterprise Using

EAP-TLS Screen

Figure 4-19: Wireless Security - WPA Enterprise Using

PEAP Screen

1 ... 19 20 21 ... 63

No comments

Cisco WPC54GX4 User's Guide Page 20