Cisco 15216 EDFA2 Specifications download pdf (Page 44)

4-2

Cisco ONS 15216 EDFA2 Operations Guide

78-13908-02

Chapter 4 Provisioning

Set the IP Address Procedure

Example 4-1 ONS 15216 EDFA2 Optical Amplifier Login Window

-- LOGIN ---------------------------------------------------- user name

ONS15216 EDFA2 Optical Amplifier

--------------------------------

Software Version 2.0.0

user name: { }

Password: { }

[Login]

Example 4-2 Login Response

Welcome to ONS15216 EDFA2 Console (v2.0.0)

Cisco15216Edfa:ONS15216 EDFA2>

Set the IP Address Procedure

For connection of the ONS 15216 EDFA2 to a LAN, it is mandatory to set the ONS 15216 IP address.

After the login step is completed, setting of the IP address is initially accomplished through a local serial

communication interface (CLI) using the RS-232 port on the front of the module and a PC serial COM

port.

Step 1 Use the snmp row set local cerent15216EdfaSromIpMgmtGroup command to set the IP address,

subnet mask, gateway address, and host name. If you do not have an IP address, subnet mask, gateway

address, or host name, contact your network administrator.

Step 2 At the command prompt, enter the snmp row set local cerent15216EdfaSromIpMgmtGroup

command (displayed in Example 4-3) and press Enter.

Example 4-3 Setting IP Address, Subnet Mask, Gateway Address, and Community ID

Cisco15216Edfa:ONS15216 EDFA2> snmp row set local cerent15216EdfaSromIpMgmtGroup

cerent15216EdfaSromIpMgmtEnetAddress 0.0.0.0

cerent15216EdfaSromIpMgmtEnetSubNetMask 0.0.0.0

cerent15216EdfaSromIpMgmtDefaultRouterAddress 0.0.0.0

cerent15216EdfaSromIpMgmthost name "host name"

Cisco15216Edfa:ONS15216 EDFA2>

Because row set is being used in this command, the user is prompted row by row to enter the IP address,

the subnet mask, the gateway address, and the community ID (host name).

1 ... 43 44 45 ... 112

No comments

Cisco 15216 EDFA2 Specifications Page 44