Cisco AIRONET CB21AG Technical Information download pdf (Page 2)

Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 1.1

OL-5800-01

System Requirements

You need the following in order to install Install Wizard 1.1 and use its software components:

• One of the following Cisco Aironet client adapters:

–

CB21AG PC-Cardbus card

–

PI21AG PCI card

• A computer running the Windows 2000 or XP operating system

Note Cisco recommends a 300-MHz (or greater) processor.

• Service Pack 1 for Windows XP

• 20 MB of free hard disk space (minimum)

• 128 MB of RAM or greater (recommended)

• If your wireless network uses EAP-TLS or PEAP authentication, Certificate Authority (CA) and

user certificates for EAP-TLS authentication or CA certificate for PEAP authentication

• If your wireless network uses PEAP (EAP-GTC) authentication with a One-Time Password (OTP)

user database:

–

A hardware token device from OTP vendors or the Secure Computing SofToken program

(release 2.1 or later)

–

Your hardware or software token password

• The following information from your system administrator:

–

The logical name for your workstation (also referred to as client name)

–

The protocols necessary to bind to the client adapter, such as TCP/IP

–

The case-sensitive service set identifier (SSID) for your RF network

–

If your network setup does not include a DHCP server, the IP address, subnet mask, and default

gateway address of your computer

–

The wired equivalent privacy (WEP) keys of the access points with which your client adapter

will communicate, if your wireless network uses static WEP for security

–

The username and password for your network account

• All necessary infrastructure devices (such as access points, servers, gateways, user databases, etc.)

must be properly configured for any authentication type you plan to enable on the client.

1 2 3 ... 26

No comments

Cisco AIRONET CB21AG Technical Information Page 2