Cisco AIRONET CB21AG Technical Information download pdf (Page 6)

Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 1.1

OL-5800-01

Installing or Upgrading Client Adapter Software

This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 1.1 on

a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer,

follow the instructions in the “Installing the Client Adapter Software” section below. If you are

upgrading your client adapter software to release 1.1, follow the instructions in the “Upgrading the

Client Adapter Software” section on page 15.

Installing the Client Adapter Software

Follow these steps to install CB21AG and PI21AG Install Wizard 1.1 on your computer.

Caution Do not eject your client adapter at any time during the installation process, including during the reboot.

Note The Install Wizard disables the Microsoft 802.1X supplicant, if installed, to prevent any potential

conflicts between ADU and the supplicant.

Note Only one wireless client adapter can be installed and used at a time. The software does not support the

use of multiple cards.

Step 1 Make sure the client adapter is not inserted in your computer. You will be instructed when to insert it.

Step 2 Use your computer’s web browser to access the following URL:

http://www.cisco.com/public/sw-center/sw-wireless.shtml

Step 3 Click Option #2: Aironet Wireless Software Display Tables.

Note If you prefer to use an automated tool, you can download software from the Software Selector

tool instead of the display tables. To do so, click Option #1: Aironet Wireless Software

Selector, follow the instructions on the window, and go to Step 7.

Step 4 Click Cisco Aironet Wireless LAN Client Adapters.

Step 5 Under Aironet Client Adapter Installation Wizard (For Windows), click 802.11a/b/g (CB21AG,

PI21AG).

Step 6 Click the Win-Client-802.11a-b-g-Ins-Wizard-v11.exe file.

Step 7 Complete the encryption authorization form; then read and accept the terms and conditions of the

Software License Agreement.

Step 8 Click the file again to download it.

Step 9 Save the file to your computer’s hard drive.

Step 10 Use Windows Explorer to find the file.

Step 11 Double-click the file. The “Starting InstallShield Wizard” message appears followed by the Preparing

Setup window (see Figure 1) and the Cisco Aironet Installation Program window (see Figure 2).

1 2 3 4 5 6 7 ... 26

No comments

Cisco AIRONET CB21AG Technical Information Page 6