Cisco Octal-Port DMT ATU-C Line Card Installation Guide download pdf (Page 3)

Cisco 6260 Quad-Port Flexi ATU-C to Octal-Port DMT ATU-C Line Card Conversion Procedures

OL-0991-01

General Safety Precautions and Maintenance Guidelines

• General Maintenance Guidelines, page 6

• Preventing Electrostatic Discharge Damage, page 7

General Safety Precautions

Before working on the equipment, be aware of standard safety practices and the hazards involved in

working with electrical circuitry to prevent accidents. Adhere to the following cautions and warnings for

safe and hazard-free installation.

Caution Proper ESD protection is required whenever you handle Cisco equipment. Installation and

maintenance personnel should be properly grounded using grounding straps to eliminate the risk of

ESD damage to the equipment. Modules are subject to ESD damagewhenever theyareremoved from

the chassis.

Caution If fuses are already installed in the fuse and alarm panel, remove them. You can replace the fuses

after the system I/O module is installed. Do not power up the system while you install and connect

the system I/O module.

Caution Static voltages as low as 30 volts can cause latent damage to circuitry on the system I/O module.

Observe all standard antistatic procedures (for example, wear a grounding strap).

Warning

This warning symbolmeans

danger

. You are in a situation that couldcause bodily injury. Before

you work on any equipment, be aware of the hazards involved with electrical circuitry and be

familiar with standard practices for preventing accidents. To see translations of the warnings

that appear in this publication, refer to the

Regulatory Compliance and Safety Information

document that accompanied this device.

Waarschuwing

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel

kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van

de bij elektrische schakelingen betrokken risico's en dient uopdehoogtetezijnvan standaard

maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in

dezepublicatieverschijnen,kuntuhetdocument

RegulatoryComplianceandSafetyInformation

(Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit

toestel is ingesloten.

Varoitus

Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan.

Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä

vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien

varoitusten käännökset löydät laitteen mukana olevasta

Regulatory Compliance and Safety

Information

-kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta).

1 2 3 4 ... 24

Comments to this Manuals

No comments

Cisco Octal-Port DMT ATU-C Line Card Installation Guide Page 3

Comments to this Manuals

Related products and manuals for Networking Cisco Octal-Port DMT ATU-C Line Card