Cisco AS5800 Specifications download pdf (Page 125)

3-43

Cisco AS5800 Operations, Administration, Maintenance, and Provisioning Guide

DOC-7810814=

Chapter 3 Operations

Modem Management Operations

In the following example, two versions of firmware are found: mica_port_firmware and

microcom_firmware. The file mica_board_firmware is not user upgradeable.

5800-NAS# dir system:ucode

Directory of system:/ucode/

14 -r-- 516060 <no date> mica_board_firmware

15 -r-- 375525 <no date> mica_port_firmware

16 -r-- 381284 <no date> microcom_firmware

No space information available

Step 4 Look at the existing contents of Flash/bootFlash for the following reasons:

• Determine what firmware versions you already have.

• Determine if your Flash/bootFlash is read-only or read/write.

• Determine if you have enough free space.

The commands show flash and show bootflash are supported in any version of Cisco IOS software.

The commands dir flash: and dir bootflash: are supported in Cisco IOS Release 12.0T.

AS5800-1# show flash

System flash directory:

File Length Name/status

1 6436752 c5800-is-mz.120-5.5.T

2 392241 mica-modem-pw.2.7.1.0.bin

[6829124 bytes used, 9948092 available, 16777216 total]

16384K bytes of processor board System flash (Read/Write)

AS5800-1# show bootflash

Boot flash directory:

File Length Name/status

1 1220196 c5800-boot-mz.120-3.bin

2 375525 mica-modem-pw.2.6.1.0.bin

3 381540 mica-modem-pw.2.6.2.0.bin

[1977456 bytes used, 2216848 available, 4194304 total]

4096K bytes of processor board Boot flash (Read/Write)

Filenames are arbitrary and are not necessarily indicative of their contents. If there is not enough free

space on Flash or bootFlash to store the desired file, then you need to:

a. Copy the existing files that you want to keep onto a TFTP server.

b. Erase the Flash memory.

c. Copy the desired files into Flash memory.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 333 334

No comments

Cisco AS5800 Specifications Page 125