Cisco SPA2102-R1 User Manual download pdf (Page 9)

www.joip.com

3. Using the Linksys Phone Adapter as an ATA +

Home Router

IMPORTANT NOTE: Your PC need to be pre-configured as a DHCP client for use with Linksys Phone Adapter. If your PC is not configured as DHCP, please

contact Customer Care at http://joip.custhelp.com/ for further assistance.

INSTALLATION:

Step I: Connect your Linksys Phone Adapter to your home network/router

1. Connect the phone: Connect a telephone to “PHONE 1” of the two phone ports (as shown in the

diagram below) on the Linksys;

2. Connect the home router: Use the Ethernet cable provided in the packaging and connect the

“INTERNET” port (as shown in the diagram below) on the Linksys to an spare Ethernet port on your

home router;

3. Connect your PC: Use different Ethernet cable and connect the “ETHERNET” port (as shown in the

diagram below) on the Linksys to the Ethernet port on your PC;

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

Cisco SPA2102-R1 User Manual Page 9