Cisco IGX 8 User Manual download pdf (Page 20)

ftc-trunk frame-relay-dlci

MOD-20

Release 12.0(2)T

ftc-trunk frame-relay-dlci

To map the FTC Frame Relay DLCI to an existing Frame Relay DLCI for data trafﬁc on the

Cisco MC3810, use the ftc-trunk frame-relay-dlci interface conﬁguration command. To remove

the FTC Frame Relay DLCI from the interface, use the no form of this command.

ftc-trunk frame-relay-dlci dlci [remote-frame-relay-dlci dlci]

no ftc-trunk frame-relay-dlci dlci [remote-frame-relay-dlci dlci]

Syntax Description

Default

No FTC trunk Frame Relay DLCI is conﬁgured.

Command Mode

Interface conﬁguration mode

Usage Guidelines

This command ﬁrst appeared in Cisco IOS Release 12.0(2)T.

Do not enter the same DLCI that was assigned to the FTC management DLCI using the ftc-trunk

management-dlci command.

Example

The following conﬁgures DLCI 200 as the FTC trunk Frame Relay DLCI:

interface serial 1

ftc-trunk frame-relay-dlci 200

Related Commands

connect

connect voice

encapsulation ftc-trunk

ftc-trunk management-dlci

ftc-trunk management-protocol

ftc-trunk voice-dlci

dlci Speciﬁes the Frame Relay DLCI for the IGX switch.

remote-frame-relay-dlci

dlci

(Optional) Speciﬁes the remote Frame Relay DLCI if there is a public Frame

Relay cloud between the Cisco MC3810 FTC port and the IGX FTM port.

Enter this option only if the local DLCI and the remote DLCI are not the

same.

1 2 ... 15 16 17 18 19 20 21 22 23 24

No comments

Cisco IGX 8 User Manual Page 20