Cisco MGC Node Manager Installation Guide download pdf (Page 31)

2-19

Cisco Media Gateway Controller Node Manager Installation Guide

OL-18332-01

Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

Cisco MNM finds the new elements using the appropriate SSH protocol. Non-SNMP communication

with elements now uses SSH secure utilities.

Identifying SSH-Enabled Elements

You can find out if an element uses SSH by checking the Security Policy in the Accounts dialog box.

Task 10: Install the CiscoView Security Module

If you are using CiscoView, you must install the CiscoView Security Module on the CiscoView server

after CiscoView and Cisco MNM have been installed.

Step 1 Find the IP address that Cisco MNM is using for the CiscoView server.

For example, if Cisco EMF is installed in <CEMF_ROOT>, enter

% <CEMF_ROOT>/bin/cmnmupdateCVip -showip

Note An IP address of 0.0.0.0 is the local workstation.

If the address is not correct, see the “Changing the IP Address of the CiscoView Server If Needed”

section on page 2-17 for instructions.

Step 2 Locate the CSCOcvsec.pkg that is shipped with the Cisco MNM software that resides in the following

ciscoviewsecurity directory:

# cd ciscoviewsecurity

If the CiscoView server is not installed on the Cisco EMF server, go to Step 3. If the CiscoView server

is installed on the Cisco

EMF server, go to Step 5.

Step 3 Use ftp to copy the CSCOcvsec package to the CiscoView server using the CiscoView server IP address

you determined with the cmnmupdateCVip command:

% ftp cvserverIPAddress

ftp> cd /tmp

ftp> binary

ftp> put CSCOcvsec.pkg /tmp/CSCOcvsec.pkg

Step 4 Use Telnet (or SSH) to connect to the CiscoView server using the following command:

# telnet cvserver

Step 5 Change the user to root.

% su - root

Step 6 Install the package using the following command:

# /usr/sbin/pkgadd -d /tmp/CSCOcvsec.pkg

Note If you uninstall and reinstall Cisco MNM, you must reinstall the security package.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

No comments

Cisco MGC Node Manager Installation Guide Page 31