Cisco SCE 1000 and Technical Information download pdf (Page 48)

Viewing the User Log Counters

View the user log for errors that occurred during the installation process.

To display the user log device counters, complete the following steps:

Step 1 At the SCE 1000# prompt, type show logger device User-File-Log counters and press Enter.

EXAMPLE:

The following example shows the current User-File-Log device counters.

SCE 1000#show logger device user-file-log counters

Logger device User-File-Log counters:

Total info messages: 1

Total warning messages: 0

Total error messages: 0

Total fatal messages: 0

If there are “Total error messages” or “Total fatal messages”, use the show logger device User-File-Log

command to display details about the errors.

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE 1000 operation and configuration. This

configuration, referred to as the running-config, is saved in the SCE 1000 volatile memory and is effective while

the SCE 1000 is up. After reboot, the SCE 1000 loads the startup-config, which includes the non-default

configuration as saved by the user, into the running-config.

The SCE 1000 provides commands for:

• Viewing the running configuration

• Viewing the startup configuration

After configuring the SCE 1000, you may query for the running configuration using the command show running-

config. This command displays the non-default running configuration. To view all SCE 1000 running configuration,

whether it is the default or not, you may use the option all-data in the show running-config command.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 57 58

No comments

Cisco SCE 1000 and Technical Information Page 48