Cisco SCE 1000 and Technical Information download pdf (Page 5)

Table 2-1 SCE Platform Model Information

Model number SCE 1010 2xGBE

Link Type Gigabit Ethernet

Number of Ports 2

Number of Links 1

Site Preparation and Unpacking

• Lift the SCE 1000 platform safely out of the packing container.

• Ensure the power service at the site is suitable for the SCE 1000 platform.

• Check the packing slip to ensure that all the proper components are present.

• Locate and have accessible the Site Log for recording information about this installation.

Tools and Parts

Use the following list of tools and parts as a checklist for preparing for installing the SCE 1000 platform:

• Appropriate cables to connect the SCE 1000 to the network and console terminal

• Tape measure (optional)

• Level (optional)

• Number 1 Phillips screwdriver

• Number 2 Phillips screwdriver

• 1/4-inch flat-blade screwdriver

• 1/4-inch hex wrench

• Grounding kit (shipped with SCE 1000)

• 12 AWG or 2.5 mm copper installation wire with hex or loop connectors for DC power leads (DC power only)

Ring terminals must be UL approved and suitable for 12 AWG wire.

• AC power cords (AC power only, shipped with SCE 1000)

• Rack-mounting kit (shipped with SCE 1000)

• Spare screws for changing bracket position

Prepare for Rack-Mount Installation

Before you begin the rack-mounting tasks, determine the type of rack—four-post or two-post—that you will be using.

1 2 3 4 5 6 7 8 9 10 ... 57 58

No comments

Cisco SCE 1000 and Technical Information Page 5