Cisco 600W User Manual download pdf (Page 11)

600W AC-Input Power Supply and Fan Tray Replacement Instructions 11

Replacing Components

Figure 6 Replacing the Fan Tray

Step 6

Insert the top runner of the fan tray through the notch in the top of the chassis. Continue

pushing the tray into the chassis, and ensure that the bottom runner slides into the track on

the ﬂoor of the chassis. If the tray hangs up, pull it back out a few inches and try pushing it

in again. If the runners seem to be catching on the brackets, push the tray slightly toward

the left when inserting it again.

Step 7 Slide the tray back into the chassis until the circuit board snaps into the backplane socket.

Step 8 Replace the M4 screw in the tab and tighten it with a number 2 Phillips screwdriver.

Removing/replacing

fan tray

H2923

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Cisco 600W User Manual Page 11