Cisco UCS C240 M3 Specifications Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Cisco UCS C240 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
22
CONFIGURING the SERVER
Approved Configurations
(1) No RAID controller plug-in card
If you did not choose a plug-in RAID controller (for example, you are using the mezzanine
RAID controller), you can select up to five PCie option cards listed in
Table 8.
(2) One RAID controller plug-in card
If you selected a plug-in PCIe RAID controller, you can select only one of the optional PCIe
cards listed in
Table 8.
Caveats
For 1-CPU systems:
Only the three PCIe slots on PCIe riser 1 are supported. The three slots are PCIe slots
1, 2, and 3 (see
Figure 2 on page 4). These are the three slots on the right when
looking at the rear of the server.
Neither the PCIe riser 2 (with the two PCIe slots numbered PCIe 4 and PCIe 5, at the
left when viewing the server from the rear) nor the mezzanine card are supported
on 1-CPU systems.
Only a single VIC card (a full-height PCIe card) may be installed on a 1-CPU system,
and it must be installed in slot 2. See
Table 1 on page 5 for the slot descriptions.
For 2-CPU systems:
Five PCIe slots are supported, three on PCIe riser 1 (PCIe slots 1, 2, and 3) and two
on PCIe riser 2 (PCIe slots 4 and 5).
All of the slots are full-height except one.
All of the server PCIe adapter cards are half-height cards, with the exception of the
Virtual Interface Card (VIC) (N2XX-ACPCI01), which is a full-height card. Therefore,
two VIC cards may be installed in 2-CPU systems, using slots 2 or 5. Note, however,
that if the server is using UCSM, only slot 2 is supported for the VIC card. See
Table 1 on page 5 for the slot descriptions.
All PCIe cards will fit in either slot, except the VIC card, which must be installed in a
full-height slot (slots 2 or 5, except only slot 2 when the server uses UCSM).
To help ensure that your operating system is compatible with the card you have selected,
check the Hardware Compatibility List at this URL:
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
NOTE: If a plug-in RAID controller card is installed, any optional PCIe card you select
will be installed in the full-height slot. RAID controllers are always installed in the
half-height slot.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments