Cisco 3526 Specifications download pdf (Page 128)

5-42

PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration

OL-3526-05

Chapter 5 Configuring Channelized mode for the Cisco PA-MC-2T3+

Checking the Configuration

Note To enable and display remote performance reports, see the “Setting the FDL Configuration for a T1

Line” section on page 5-13, and the “Displaying Remote Performance Reports” section on page 5-42.

Displaying Remote Performance Reports

To display performance data from the remote T1 equipment, use the following command:

show controllers T3 0/1/0 remote performance.

Examples follow:

• The example that follows is for a port adapter on a VIP in interface processor slot 1:

Router# show controllers T3 1/1/0 remote performance

T3 1/1/0 is up. Hardware is 2CT3+ single wide port adapter

CT3 H/W Version : 1.0.0, CT3 ROM Version: 1.1, CT3 F/W Version: 0.23.0

FREEDM version: 1

T1 1 - Remote Performance Data

Data in current interval (356 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs

0 Unavail Secs

Data in Interval 1:

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs

0 Unavail Secs

Data in Interval 2:

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs

0 Unavail Secs

Total Data (last 2 15 minute intervals):

1 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs

0 Unavail Secs

T1 2 - Remote Performance Data

(additional displayed text not shown)

• The example that follows is for a port adapter in slot 3 of a Cisco 7200 series router:

router# show controllers t3 3/0 remote performance tabular

T3 3/0 is down. Hardware is 2CT3+ single wide port adapter

CT3 H/W Version : 0.1.1, CT3 ROM Version : 0.95, CT3 F/W Version : 1.3.2

FREEDM version: 1, reset 0

T1 1 - Remote Performance Data (Not available)

T1 2 - Remote Performance Data (Not available)

T1 3 - Remote Performance Data (Not available)

T1 4 - Remote Performance Data (Not available)

1 ... 127 128 129 130

Comments to this Manuals

No comments

Cisco 3526 Specifications Page 128

Comments to this Manuals

Related products and manuals for Gateways/controllers Cisco 3526