Cisco IAD2435-8FXS Specifications download pdf (Page 37)

3-3

Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide

OL-4306-03

Chapter 3 Configuring with the Command-Line Interface

Configuring the Hostname and Password

Verifying the Hostname and Password

To verify that you configured the correct hostname and password, follow these steps:

Step 1 Enter the show config command:

Router(config)# show config

Using 1888 out of 126968 bytes

version XX.X

hostname IAD2430

enable secret 5 $1$60L4$X2JYOwoDc0.kqa1loO/w8/

Check the hostname and encrypted password displayed near the top of the command output.

Step 2 Exit global configuration mode and attempt to reenter it, using the new enable password:

Router# exit

Router con0 is now available

Press RETURN to get started.

Router> enable

Step 5

line console

Example:

Router(config)# line console 0

Enters line configuration mode to configure the console

port. When you enter line configuration mode, the

prompt changes to

Router(config-line)#.

Step 6

exec-timeout

Example:

Router(config-line)# exec-timeout 0 0

If no input is detected during the interval, the EXEC

facility resumes the current connection. If no

connections exist, the EXEC facility returns the terminal

to the idle state and disconnects the incoming session.

Note To specify no timeout, enter the

exec-timeout

0 0 command.

Step 7

exit

Example:

Router(config-line)# exit

Exits to global configuration mode.

Step 8

end

Example:

Router(config-if)# end

Returns you to privileged EXEC mode.

Command or Action Purpose

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 123 124

Comments to this Manuals

No comments

Cisco IAD2435-8FXS Specifications Page 37

Comments to this Manuals

Related products and manuals for Networking Cisco IAD2435-8FXS