Cisco LINKSYS WAG54GS (EU) User's Guide Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
15
Chapter 5: Configuring the Gateway
How to Access the Web-based Utility
Wireless-G ADSL Gateway
How to Access the Web-based Utility
To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Gateway’s default
IP address, 192.168.1.1, in the Address field. Then press Enter.
A password request page, shown in Figure 5-1 will appear. (non-Windows XP users will see a similar screen.)
Enter admin (the default user name) in the User Name field, and enter admin (the default password) in the
Password field. Then click the OK button.
The Setup Tab
The Basic Setup Tab
The first screen that appears is the Basic Setup tab. (See Figure 5-2.) This tab allows you to change the
Gateway's general settings. Change these settings as described here and click the Save Settings button to save
your changes or Cancel Changes to cancel your changes.
Internet Setup
VC Settings. Virtual Circuit (VPI and VCI): These fields consist of two items: VPI (Virtual Path Identifier) and VCI
(Virtual Channel Identifier). Your ISP will provide the correct settings for these fields. Multiplexing: Select LLC
or VC , depending on your ISP.
ADSL Settings. The Gateway supports five Encapsulations: RFC 1483 Bridged, RFC 1483 Routed, RFC 2516
PPPoE, RFC 2364 PPPoA, and Bridged Mode Only. Each Basic Setup screen and available features will differ
depending on what kind of encapsulation you select.
RFC 1483 Bridged
Dynamic IP
IP Settings. Select Obtain an IP Address Automatically if your ISP says you are connecting through a
dynamic IP address. (See Figure 5-3.)
Figure 5-2: Basic Setup Tab
Figure 5-1: Password Screen
Page view 21
1 ... 21 22 23 ... 95

Comments to this Manuals

No comments