Cisco LINKSYS WAG54GS (EU) User's Guide download pdf (Page 71)

Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway

How to Establish a Secure IPSec Tunnel

Wireless-G ADSL Gateway

3. The IP Filter List screen should appear, as shown in Figure C-4. Enter an appropriate name, such as win-

>Gateway, for the filter list, and de-select the Use Add Wizard check box. Then, click the Add button.

4. The Filters Properties screen will appear, as shown in Figure C-5. Select the Addressing tab. In the Source

address field, select My IP Address. In the Destination address field, select A specific IP Subnet, and fill in the

IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (These are the Gateway’s default settings. If you

have changed these settings, enter your new values.)

5. If you want to enter a description for your filter, click the Description tab and enter the description there.

6. Click the OK button. Then, click the OK (for Windows XP) or Close (for Windows 2000) button on the IP Filter

List window.

Filter List 2: Gateway=>win

7. The New Rule Properties screen will appear, as shown in Figure C-6. Select the IP Filter List tab, and make

sure that win -> Gateway is highlighted. Then, click the Add button.

Figure C-4: IP Filter List

Figure C-5: Filters Properties

Figure C-6: New Rule Properties

1 ... 70 71 72 ... 95

No comments

Cisco LINKSYS WAG54GS (EU) User's Guide Page 71