Cisco RVS4000 - Gigabit Security Router User's Guide download pdf (Page 15)

Chapter 5

Setting Up and Configuring the Router

4-Port Gigabit Security Router with VPN

Network Setting Status

LAN IP Displays the IP address of the Router’s LAN

interface.

WAN IP Displays the IP address of the Router’s WAN

interface. If this address was assigned using DHCP,

click DHCP Release to release the address, or click

DHCP Renew to renew the address.

Mode Displays the operating mode, Gateway or Router.

Gateway Displays the Gateway address, which is the IP

address of your ISP’s server.

DNS 1-2 The IP addresses of the Domain Name System

(DNS) server(s) that the Router is using.

DDNS Indicates whether the Dynamic Domain Name

System (DDNS) feature is enabled.

DMZ Host Indicates whether the DMZ Hosting feature is

enabled.

Firewall Setting Status

DoS (Denial of Service) Indicates whether the DoS

Protection feature is enabled to block DoS attacks.

Block WAN Request Indicates whether the Block WAN

Request feature is enabled.

Remote Management Indicates whether the Remote

Management feature is enabled.

IPSec VPN Setting Status

IPSec VPN Summary Click the IPSec VPN Summary

hyperlink to display the VPN > Summary screen.

Tunnel(s) Used Displays the number of VPN tunnels

currently being used.

Tunnel(s) Available Displays the number of VPN tunnels

that are available.

Log Setting Status

E-mail If this displays Email cannot be sent because you

have not specified an outbound SMTP server address, then

you have not set up the mail server. Click the E-mail

hyperlink to display the Administration > Log screen where

you can configure the SMTP mail server.

Setup > WAN

Internet Connection Type

The Router supports six types of connections. Each

Setup > WAN screen and available features will differ

depending on what kind of connection type you select.

Automatic Configuration - DHCP

By default, the Router’s Configuration Type is set to

Automatic Configuration - DHCP, and it should be kept

only if your ISP supports DHCP or you are connecting

through a dynamic IP address.

Automatic Configuration - DHCP

Static IP

If your connection uses a permanent IP address to connect

to the Internet, then select Static IP.

Static IP

Internet IP Address This is the Router’s IP address, when

seen from the WAN, or the Internet. Your ISP will provide

you with the IP Address you need to specify here.

Subnet Mask This is the Router’s Subnet Mask, as seen

by external users on the Internet (including your ISP). Your

ISP will provide you with the Subnet Mask.

Default Gateway Your ISP will provide you with the

Default Gateway Address, which is the ISP server’s IP

address.

Primary DNS (Required) and Secondary DNS

(Optional) Your ISP will provide you with at least one

DNS (Domain Name System) Server IP Address.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 82 83

Comments to this Manuals

No comments

Cisco RVS4000 - Gigabit Security Router User's Guide Page 15

Comments to this Manuals

Related products and manuals for Networking Cisco RVS4000 - Gigabit Security Router