Cisco RVS4000 - Gigabit Security Router User's Guide download pdf (Page 52)

Configuring IPSec with a Windows 2000 or XP Computer

4-Port Gigabit Security Router with VPN

Appendix C

Make sure the 2. IP Filter List tab is selected. Click Add.

IP Filter List Tab

The 3. IP Filter List screen should appear. Enter an

appropriate name, such as win->Router, for the filter

list, and de-select the Use Add Wizard check box.

Then, click Add.

IP Filter List

The 4. Filters Properties screen will appear. Select the

Addressing tab.

Filters Properties

In the Source address field, select My IP Address. In the

Destination address field, select A specific IP Subnet,

and enter the IP Address 192.168.1.0 and Subnet

mask 255.255.255.0. (These are the Router’s default

settings. If you have changed these settings, enter

your new values.)

If you want to enter a description for your filter, click 5.

the Description tab and enter the description there.

Click 6. OK. Then, click OK or Close in the IP Filter List

window.

Filter List 2: router -> win

The 7. New Rule Properties screen will appear. Select the

IP Filter List tab, and make sure that win -> Router is

highlighted. Then, click Add.

New Rules Properties

The 8. IP Filter List screen should appear. Enter an

appropriate name, such as Router->win for the filter

list, and de-select the Use Add Wizard check box.

Click Add.

IP Filter List

The 9. Filters Properties screen will appear. Select the

Addressing tab. In the Source address field, select

A specific IP Subnet, and enter the IP Address

192.168.1.0 and Subnet mask 255.255.255.0. (Enter

your new values if you have changed the default

settings.) In the Destination address field, select My IP

Address.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 82 83

No comments

Cisco RVS4000 - Gigabit Security Router User's Guide Page 52