Cisco RVS4000 - Gigabit Security Router User's Guide download pdf (Page 56)

Configuring IPSec with a Windows 2000 or XP Computer

4-Port Gigabit Security Router with VPN

Appendix C

Step 4: Assign New IPSec Policy

In the IP Security Policies on Local Machine window, right-

click the policy named to_Router, and click Assign. A

green arrow appears in the folder icon.

Local Computer

Step 5: Create a Tunnel Through the Web-Based

Utility

Open your web browser, and enter 1. 192.168.1.1 in the

Address field. Press Enter.

When the 2. User name and Password fields appear, enter

the default user name and password, admin. Press

Enter.

Click the 3. VPN tab, then click IPSec VPN.

VPN > IPSec VPN

Select the tunnel you wish to create in the 4. Select

Tunnel Entry drop-down box. Then click Enable. Enter

the name of the tunnel in the Tunnel Name field. This

is to allow you to identify multiple tunnels and does

not have to match the name used at the other end of

the tunnel.

Enter the IP Address and Subnet Mask of the local VPN 5.

Router in the Local Group Setup fields. To allow access

to the entire IP subnet, enter 0 for the last set of IP

Addresses (e.g. 192.168.1.0).

Enter the IP Address and Subnet Mask of the VPN 6.

device at the other end of the tunnel (the remote VPN

Router or device with which you wish to communicate)

in the Remote Group Setup fields.

Select from two types of authentication: 7. MD5 and

SHA1 (SHA1 is recommended because it is more

secure). As with encryption, either of these may be

selected, provided that the VPN device at the other end

of the tunnel is using the same type of authentication.

Or, both ends of the tunnel may choose to Disable

authentication.

Select the Key Management. Select 8. Auto (IKE) and

enter a series of numbers or letters in the Pre-shared

Key field. Select PFS (Perfect Forward Secrecy) to

ensure that the initial key exchange and IKE proposals

are secure. You may use any combination of up to 128

numbers or letters in this field. No special characters

or spaces are allowed. In the Key Lifetime field, you

may optionally select to have the key expire at the end

of a time period you designate. Enter the number of

seconds you’d like the key to be useful, or leave it blank

for the key to last indefinitely.

Click 9. Save Settings to save these changes.

Your tunnel should now be established.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 82 83

Comments to this Manuals

No comments

Cisco RVS4000 - Gigabit Security Router User's Guide Page 56

Comments to this Manuals

Related products and manuals for Networking Cisco RVS4000 - Gigabit Security Router