Cisco RVS4000 - Gigabit Security Router User's Guide download pdf (Page 57)

Gateway-to-Gateway VPN Tunnel

4-Port Gigabit Security Router with VPN

Appendix D

Appendix D:

Gateway-to-Gateway VPN

Tunnel

Overview

This appendix explains how to configure an IPSec VPN

tunnel between two VPN Routers by example. Two

computers are used to test the liveliness of the tunnel.

Before You Begin

The following is a list of equipment you need:

Two Windows desktop computers (each computer will

•

be connected to a VPN Router)

Two VPN Routers (4-Port Gigabit Security Router with •

VPN, model number RVS4000, and 10/100 8-Port VPN

Router, model number RV082) that are both connected

to the Internet

Any VPN Router can be deployed, such as the Linksys

10/100 16-, 8-, or 4-Port VPN Router (model numbers

RV016, RV082, or RV042); however, this example uses the

RV082.

Configuration when the Remote Gateway

Uses a Static IP Address

This example assumes the Remote Gateway is using a

static IP address. If the Remote Gateway uses a dynamic

IP address, refer to “Configuration when the Remote

Gateway Uses a Dynamic IP.”

RVS4000

WAN: A.A.A.A

LAN: 192.168.5.1

RV082

WAN: B.B.B.B

LAN: 192.168.1.1

Gateway-to-Gateway IPSec VPN Tunnel - Remote Gateway Using

Static IP

NOTE: Each computer must have a network

adapter installed.

Configuration of the RVS4000

Follow these instructions for the first VPN Router,

designated RVS4000. The other VPN Router is designated

the RV082.

Launch the web browser for a networked computer, 1.

designated PC 1.

Access the web-based utility of the RVS4000. (Refer to 2.

“Chapter 5: Setting Up and Configuring the Router” for

details.)

Click the3. VPN tab.

Click 4. IPSec VPN.

Enter a name in the 5. Tunnel Name field.

For the IPSec VPN Tunnel setting, select 6. Enable.

The WAN IP address (A.A.A.A) of the RVS4000 will be 7.

automatically detected.

For the Local Security Group Type, select Subnet. Enter

the RVS4000’s local network settings in the IP Address

and Subnet Mask fields.

RVS4000 IPSec VPN Settings

For the Remote Security Gateway Type, select 8. IP

address. Enter the RV082’s WAN IP address in the IP

Address field.

For the Remote Security Group Type, select 9. Subnet.

Enter the RV082’s local network settings in the IP

Address and Subnet Mask fields.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 82 83

Comments to this Manuals

No comments

Cisco RVS4000 - Gigabit Security Router User's Guide Page 57

Comments to this Manuals

Related products and manuals for Networking Cisco RVS4000 - Gigabit Security Router