Cisco RVS4000 - Gigabit Security Router User's Guide download pdf (Page 32)

Chapter 5

Setting Up and Configuring the Router

4-Port Gigabit Security Router with VPN

UPnP

Universal Plug and Play (UPnP) can used to set up public

services on your network. When the UPnP function is

enabled, Windows XP can add or delete entries to the

underlined UPnP Forwarding Table. Some Internet games

require enabling UPnP.

UPnP If you want to use UPnP, keep the default setting,

Enable. Otherwise, select Disable.

Administration > Log

Log Setting

Log Level Select the log level(s) that the Router should

record. Log levels and their meanings are:

Log Levels

Level Severity Name Description

7 LOG_DEBUG Debug-level message

6 LOG_INFO Informational messages only

5 LOG_NOTICE Normal but significant condition

4 LOG_WARNING Warning conditions

3 LOG_ERR Error conditions

2 LOG_CRIT Critical conditions

1 LOG_ALERT Immediate action needed

0 LOG_EMERG System unusable

Outgoing Log Select Enable to cause all outgoing

packets to be logged. You can then click View Outgoing

Table to display information on the outgoing packets

including Source IP, Destination IP, and Service/Port

number.

Incoming Log Select Enable to cause all incoming packets

to be logged. You can then click View Incoming Table to

display information on incoming packets including Source

IP, Destination IP, and Service/Port number.

Email Alerts

Email Alerts Select Enable to cause an e-mail to be sent

immediately if a DoS (Denial of Service) attack is detected.

If enabled, fill in the e-mail address information in the

remaining fields in this section.

Denial of Service Thresholds Enter the number of DoS

(Denial of Service) attacks which need to be blocked by

the built-in Firewall before an e-mail alert is sent. The

minimum value is 20, the maximum value is 100.

Log Queue Length The default is 50 entries (Router will

e-mail the log if there are more than 50 entries).

Log Time Threshold The default is 10 minutes (Router

will e-mail the log every 10 minutes).

SMTP Mail Server Enter the address (domain name) or

IP address of the SMTP (Simple Mail Transport Protocol)

Server you use for outgoing e-mail.

Email Address for Alert Logs Enter the e-mail address

the Log is to be sent to.

Return Email Address The e-mail will show this address

as the Sender’s address.

Enable SMTP Authentication If your SMTP server

requires Authentication, you can enable it here, and enter

the Username and Password.

E-mail Log Now Press this button to cause the log to be

e-mailed immediately.

Syslog

Enable Syslog Select the checkbox if you want to use

this feature.

Syslog Server Enter the IP Address in this field when

Enable Syslog is checked.

Local Log

Local Log Enable this if you want to see a log of all

incoming and outgoing URLs or IP addresses.

View Log Click this button when you wish to view the

logs. A new window will appear with the log data.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 82 83

Comments to this Manuals

No comments

Cisco RVS4000 - Gigabit Security Router User's Guide Page 32

Comments to this Manuals

Related products and manuals for Networking Cisco RVS4000 - Gigabit Security Router