Cisco WIRELESS LAN CONTROLLER OL-17037-01 User Manual download pdf (Page 23)

7-23

Cisco Wireless LAN Controller Configuration Guide

OL-17037-01

Chapter 7 Controlling Lightweight Access Points

Autonomous Access Points Converted to Lightweight Mode

Step 10 To view details about the access points that are provisioned using LSC, enter this command:

show certificate lsc ap-provision

Information similar to the following appears:

LSC AP-Provisioning........................... Yes

Provision-List................................ Present

Idx Mac Address

--- ------------

1 00:18:74:c7:c0:90

Using the GUI to Authorize Access Points

Using the controller GUI, follow these steps to authorize access points.

Step 1 Click Security > AAA > AP Policies to open the AP Policies page (see Figure 7-6).

Figure 7-6 AP Policies Page

Step 2

If you want the access point to accept self-signed certificates (SSCs), manufactured-installed certificates

(MICs), or local significant certificates (LSCs), check the appropriate check box.

Step 3 If you want the access points to be authorized using a AAA RADIUS server, check the Authorize MIC

APs against auth-list or AAA check box.

Step 4 If you want the access points to be authorized using an LSC, check the Authorize LSC APs against

auth-list check box.

Step 5 Click Apply to commit your changes.

Step 6 Follow these steps to add an access point to the controller’s authorization list:

a. Click Add to access the Add AP to Authorization List area.

b. In the MAC Address field, enter the MAC address of the access point.

1 ... 22 23 24 ... 80

No comments

Cisco WIRELESS LAN CONTROLLER OL-17037-01 User Manual Page 23