Cisco WIRELESS LAN CONTROLLER OL-17037-01 User Manual download pdf (Page 53)

7-53

Cisco Wireless LAN Controller Configuration Guide

OL-17037-01

Chapter 7 Controlling Lightweight Access Points

Configuring Country Codes

Using the CLI to Configure Country Codes

Follow these steps to configure country codes using the CLI.

Step 1 To see a list of all available country codes, enter this command:

show country supported

Step 2 Enter these commands to disable the 802.11a and 802.11b/g networks:

config 802.11a disable network

config 802.11b disable network

Step 3 To configure the country codes for the countries where your access points are installed, enter this

command:

config country code1[,code2,code3,...]

If you are entering more than one country code, separate each by a comma (for example, config country

US,CA,MX). Information similar to the following appears:

Changing country code could reset channel configuration.

If running in RFM One-Time mode, reassign channels after this command.

Check customized APs for valid channel values after this command.

Are you sure you want to continue? (y/n) y

Step 4 Enter Y when prompted to confirm your decision. Information similar to the following appears:

Configured Country............................. Multiple Countries:US,CA,MX

Auto-RF for this country combination is limited to common channels and power.

KEY: * = Channel is legal in this country and may be configured manually.

A = Channel is the Auto-RF default in this country.

. = Channel is not legal in this country.

C = Channel has been configured for use by Auto-RF.

x = Channel is available to be configured for use by Auto-RF.

(-) = Regulatory Domains allowed by this country.

------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-

802.11BG :

Channels : 1 1 1 1 1

: 1 2 3 4 5 6 7 8 9 0 1 2 3 4

------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-

US (-AB) : A * * * * A * * * * A . . .

CA (-AB) : A * * * * A * * * * A . . .

MX (-NA) : A * * * * A * * * * A . . .

Auto-RF : C x x x x C x x x x C . . .

------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

802.11A : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6

--More-- or (q)uit

: 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5

------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

US (-AB) : . A . A . A . A A A A A * * * * * . . . * * * A A A A *

CA (-ABN) : . A . A . A . A A A A A * * * * * . . . * * * A A A A *

MX (-N) : . A . A . A . A A A A A . . . . . . . . . . . A A A A *

Auto-RF : . C . C . C . C C C C C . . . . . . . . . . . C C C C x

Step 5 To verify your country code configuration, enter this command:

show country

1 ... 52 53 54 ... 80

Comments to this Manuals

No comments

Cisco WIRELESS LAN CONTROLLER OL-17037-01 User Manual Page 53

Comments to this Manuals

Related products and manuals for Hardware Cisco WIRELESS LAN CONTROLLER OL-17037-01