Cisco WIRELESS LAN CONTROLLER OL-17037-01 User Manual download pdf (Page 61)

7-61

Cisco Wireless LAN Controller Configuration Guide

OL-17037-01

Chapter 7 Controlling Lightweight Access Points

Optimizing RFID Tracking on Access Points

Step 2 Click the name of the access point for which you want to configure monitor mode. The All APs > Details

for page appears.

Step 3 From the AP Mode drop-down box, choose Monitor.

Step 4 Click Apply to commit your changes.

Step 5 Click OK when warned that the access point will be rebooted.

Step 6 Click Save Configuration to save your changes.

Step 7 Click Wireless > Access Points > Radios > 802.11b/g/n to open the 802.11b/g/n Radios page.

Step 8 Hover your cursor over the blue drop-down arrow for the desired access point and choose Configure.

The 802.11b/g/n Cisco APs > Configure page appears (see Figure 7-20).

Figure 7-20 802.11b/g/n Cisco APs > Configure Page

Step 9

To disable the access point radio, choose Disable from the Admin Status drop-down box and click

Apply.

Step 10 To enable tracking optimization on the radio, choose Enable from the Enable Tracking Optimization

drop-down box.

Step 11 From the four Channel drop-down boxes, choose the channels on which you want to monitor RFID tags.

Note You must configure at least one channel on which the tags will be monitored.

1 ... 60 61 62 ... 80

No comments

Cisco WIRELESS LAN CONTROLLER OL-17037-01 User Manual Page 61