Cisco VPN 3000 User's Guide download pdf (Page 261)

Configuration | Policy Management | Traffic Management | Rules

13-11

VPN 3000 Concentrator Series User Guide

*For VRRP In and VRRP Out, the Destination Address is 224.0.0.18/0.0.0.0, which is the

IANA-assigned IP multicast address for VRRP.

Add / Modify / Copy / Delete

To configure a new rule, click Add. The Manager opens the Configuration | Policy Management | Traffic

Management | Rules | Add

screen.

To modify a rule that has been configured, select the rule from the list and click

Modify. The Manager

opens the

Configuration | Policy Management | Traffic Management | Rules | Modify screen.

To copy a configured rule, modify it, and save it with a new name, select the rule from the list and click

Copy. See the Configuration | Policy Management | Traffic Management | Rules | Copy screen.

To delete a configured rule, select the rule from the list and click

Delete.

• If the rule is not being used in a filter, the Manager deletes the rule, refreshes the screen, and shows

the remaining rules in the list. There is no confirmation or undo.

• If the rule is being used in a filter, the Manager asks you to confirm the deletion. See the

Configuration

| Policy Management | Traffic Management | Rules | Delete

screen.

• You cannot delete a rule that is configured as part of a LAN-to-LAN connection. See the Configuration

screen.

Note: Deleting a rule deletes it from every filter that uses it and deletes it from the VPN Concentrator active

configuration. To remove a rule from a filter but retain it in the active configuration, see the

Configuration

| Policy Management | Traffic Management | Assign Rules to Filter

screen.

Reminder: The Manager immediately includes your changes in the active configuration. To save the active

configuration and make it the boot configuration, click the

Save Needed icon at the top of the Manager

window.

Outgoing HTTPS In Inbound TCP Don’t Care HTTPS (443) Range 0-65535

Outgoing HTTPS

Out

Outbound TCP Don’t Care Range 0-65535 HTTPS (443)

PPTP In Inbound TCP Don’t Care Range 0-65535 PPTP (1723)

PPTP Out Outbound TCP Don’t Care PPTP (1723) Range 0-65535

RIP In Inbound UDP RIP (520) RIP (520)

RIP Out Outbound UDP RIP (520) RIP (520)

Telnet/SSL In Inbound TCP Don’t Care Range 0-65535 Telnet/SSL (992)

Telnet/SSL Out Outbound TCP Don’t Care Telnet/SSL (992) Range 0-65535

VRRP In * Inbound Other 112

VRRP Out * Outbound Other 112

Table 13-1: Cisco-supplied default filter rules (continued)

Filter Rule Name Direction Protocol TCP

Connection

TCP/UDP

Source Port

TCP/UDP

Destination Port

ICMP

Packet

Type

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 501 502

Comments to this Manuals

No comments

Cisco VPN 3000 User's Guide Page 261

Comments to this Manuals

Related products and manuals for Networking Cisco VPN 3000