Cisco VPN 3000 User's Guide Page 422

  • Download
  • Add to my manuals
  • Print
  • Page
    / 502
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 421
15 Monitoring
15-78
VPN 3000 Concentrator Series User Guide
Monitor | Statistics | MIB-II | Interfaces
This screen shows statistics in MIB-II objects for VPN Concentrator interfaces since the system was last
booted or reset. This screen also shows statistics for VPN tunnels as logical interfaces. RFC 2233 defines
interface MIB objects.
Figure 15-40: Monitor | Statistics | MIB-II | Interfaces screen
Refresh
To update the screen and its data, click Refresh. The date and time indicate when the screen was last
updated.
Interface
The VPN Concentrator interface:
Ethernet 1 (Private) = Ethernet 1 (Private) interface.
Ethernet 2 (Public) = Ethernet 2 (Public) interface.
Ethernet 3 (External) = Ethernet 3 (External) interface.
WAN 1.A = WAN interface module in Slot 1, Port A
WAN 1.B = WAN interface module in Slot 1, Port B
WAN 2.A = WAN interface module in Slot 2, Port A
WAN 2.B = WAN interface module in Slot 2, Port B
1000 and up = VPN tunnels, which are treated as logical interfaces.
Status
The operational status of this interface:
UP = configured and enabled, ready to pass data traffic.
DOWN = configured but disabled.
Testing = in test mode; no regular data traffic can pass.
Dormant = configured and enabled but waiting for an external action, such as an incoming
connection.
Not Present = missing hardware components.
Lower Layer Down = not operational because a lower-layer interface is down.
Unknown = not configured.
Page view 421
1 2 ... 417 418 419 420 421 422 423 424 425 426 427 ... 501 502

Comments to this Manuals

No comments