Cisco VPN 3000 User's Guide Page 73

  • Download
  • Add to my manuals
  • Print
  • Page
    / 502
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 72
Configuration | Interfaces | Power
3-5
VPN 3000 Concentrator Series User Guide
Power Supplies
To configure alarm thresholds on system power supplies, click the appropriate highlighted link or click
in a highlighted power supply module in the back-panel image and see
Configuration | Interfaces | Power.
Ethernet 1 (Private), Ethernet 2 (Public), Ethernet 3 (External) module in
back-panel image
To configure Ethernet interface parameters, click the appropriate highlighted Ethernet module in the
back-panel image and see
Configuration | Interfaces | Ethernet 1 2 3.
WAN Card Slot N module in back-panel image
To configure the WAN interface card, click the highlighted WAN card module in the back-panel image,
and see
Configuration | Interfaces | WAN Card in Slot N.
Configuration | Interfaces | Power
This screen lets you configure alarm thresholds for voltages in the system power supplies, CPU, and
main circuit board.
On this screen, you set high and low thresholds for the voltages. When the system detects a voltage
outside a threshold value, it generates a
HARDWAREMON (hardware monitoring) event (see Configuration |
System | Events
). If a power supply is faulty, the appropriate Power Supply LED on the front panel is amber.
Caution: If a voltage generates an alarm, shut down the system in an orderly way and contact Cisco support.
Operating the system with out-of-range voltages, especially if they exceed the high threshold, may cause
permanent damage.
You can view system voltages and status on the
Monitor | System Status | Power screen.
Page view 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 501 502

Comments to this Manuals

No comments