Cisco VPN 3000 User's Guide download pdf (Page 312)

14 Administration

14-18

VPN 3000 Concentrator Series User Guide

Action

Click a radio button to select the desired action. You can select only one action.

Reboot = Reboot the VPN Concentrator. Rebooting terminates all sessions, resets the hardware,

loads and verifies the software image, executes system diagnostics, and initializes the system. A

reboot takes about 60-75 seconds. (This is the default selection.)

Shutdown without automatic reboot = Shut down the VPN Concentrator; that is, bring the system to a

halt so you can turn off the power. Shutdown terminates all sessions and prevents new user sessions

(but not administrator sessions). While the system is in a shutdown state, the

System LED (Model

3005) or the blue usage LEDs (Models 3015–3080) blink on the front panel.

Cancel a scheduled reboot/shutdown = Cancel a reboot or shutdown that is waiting for a certain time

or for sessions to terminate. (This is the default selection if a reboot or shutdown is pending.)

Configuration

Click a radio button to select the configuration file handling at reboot. These selections apply to reboot

only. You can select only one option.

Save the active configuration at time of reboot = Save the active configuration to the CONFIG file, and

reboot using that new file.

Reboot without saving the active configuration = Reboot using the existing CONFIG file and without

saving the active configuration. (This is the default selection.)

Reboot with Factory/Default configuration = Reboot using all the factory defaults; i.e., start the system

as if it had no

CONFIG file. You will need to go through all the Quick Configuration steps described

in the VPN Concentrator Getting Started manual, including setting the system date and time and

supplying an IP address for the Ethernet 1 (Private) interface, using the system console. This option

does not destroy any existing

CONFIG file, and it does not reset Administrator parameter settings.

When to Reboot/Shutdown

Click a radio button to select when to reboot or shutdown. You can select only one option.

Now = Reboot or shutdown as soon as you click Apply. (This is the default selection.)

Delayed by [NN] minutes = Reboot or shutdown NN minutes from when you click Apply, based on

system time. Enter the desired number in the field; the default is

10 minutes. (FYI: 1440 minutes =

24 hours.)

At time [HH:MM] = Reboot or shutdown at the specified system time, based on a 24-hour clock. Enter

the desired time in the field. Use 24-hour notation and enter numbers in all positions. The default is

10 minutes after the current system time.

Wait for sessions to terminate (don’t allow new sessions) = Reboot or shutdown as soon as the last

session terminates, and don’t allow any new sessions in the meantime. If you (the administrator) are

the last session, you must log out for the system to reboot or shutdown.

Apply / Cancel

To take action with the selected options, click Apply. The Manager returns to the main Administration

screen if you don’t reboot or shutdown now.

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 501 502

Comments to this Manuals

No comments

Cisco VPN 3000 User's Guide Page 312

Comments to this Manuals

Related products and manuals for Networking Cisco VPN 3000