Cisco RV016 - Small Business - 10/100 VPN Router User's Guide download pdf (Page 105)

Appendix A: Troubleshooting

Frequently Asked Questions

10/100 16-Port VPN Router

Does the Router support ICQ send file?

Yes, with the following fix: click ICQ menu => preference => connections tab=>, and check I am behind a

firewall or proxy. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then

send a file to a user behind the Router.

I set up an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do?

If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN

computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. You can

also use a port forwarding range of 7777 to 27900. If you want to use the UT Server Admin, forward another port

(8080 usually works well but is used for remote admin—you may have to disable this). Then in the

[UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and

ServerName to the IP assigned to the Router from your ISP.

Can multiple gamers on the LAN get on one game server and play simultaneously with just one public IP

address?

It depends on which network game or what kind of game server you are using. For example, Unreal Tournament

supports multi-login with one public IP.

How do I get Half-Life: Team Fortress to work with the Router?

The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x” added

to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the

same server. One problem: Version 1.0.1.6 won’t let multiple computers with the same CD key connect at the

same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does not

need to be in the DMZ. Just forward port 27015 to the local IP address of the server computer.

How can I block corrupted FTP downloads?

If you are experiencing corrupted files when you download a file with your FTP client, try using another FTP

program.

The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the

screen. What do I need to do?

Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your

Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapter’s

Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at

www.linksys.com for more information.

If all else fails in the installation, what can I do?

Reset the Router by holding down the Reset button for ten seconds. Reset your cable or DSL modem by powering

the unit off and then on. Obtain and flash the latest firmware release that is readily available on the Linksys

website, www.linksys.com.

1 ... 104 105 106 ... 127

No comments

Cisco RV016 - Small Business - 10/100 VPN Router User's Guide Page 105