Cisco RV016 - Small Business - 10/100 VPN Router User's Guide download pdf (Page 110)

Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter

For the Router’s Web-based Utility

10/100 16-Port VPN Router

3. Write down the Physical Address as shown on your computer screen (Figure C-3); it is the MAC address for

your Ethernet adapter. This appears as a series of numbers and letters.

The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.

The example in Figure C-3 shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may

show something different.

For the Router’s Web-based Utility

The MAC Clone table displays the number of WAN ports you have configured on the Network or Port Management

screen. Their MAC addresses are shown in the MAC Address column. Click the Edit in the Config. column to edit

the MAC Clone setting of the selected WAN port. A new screen will appear.

In the Interface field, the WAN port number is displayed. To manually clone a MAC address, select User Defined

WAN MAC Address, and then enter the 12 digits of your adapter’s MAC address. If you want to clone the MAC

address of the PC you are currently using to configure the Router, then select MAC Address from this PC.

Click the Save Settings button to save your changes, or click the Cancel Changes button to undo your changes.

Click the Back button to return to the previous page if you want to configure the other WAN ports.

Figure C-3: MAC Address/Physical Address

Note: The MAC address is also called the Physical Address.

Figure C-4: MAC Clone

Figure C-5: Edit MAC Clone

1 ... 109 110 111 ... 127

No comments

Cisco RV016 - Small Business - 10/100 VPN Router User's Guide Page 110