Cisco RV016 - Small Business - 10/100 VPN Router User's Guide download pdf (Page 90)

Chapter 6: Setting up and Configuring the Router

Wizard Tab

10/100 16-Port VPN Router

4. The screen shown in Figure 6-114 will appear. Select the service you want from the Service pull-down menu.

Click the Next button to continue. Click the Previous button if you want to return to the previous screen. Click

the Exit button if you want to exit the Access Rule Setup Wizard.

5. The screen shown in Figure 6-115 will appear. For this service, you can select whether or not you want the

Router to keep a log tracking this type of activity. To keep a log, select Log packets matching this access

rule. If you don’t want a log, select Do not log packets matching this access rule. Click the Next button to

continue. Click the Previous button if you want to return to the previous screen. Click the Exit button if you

want to exit the Access Rule Setup Wizard.

6. The screen shown in Figure 6-116 will appear. Select the appropriate Source Interface (LAN, DMZ, Any, WAN1,

WAN2...) from the Ethernet pull-down menu.

Select the Source IP address(es) for this Access Rule. If it can be any IP address, select Any. If it is one IP

address, select Single and enter the IP address in the Source IP fields. If it is a range of IP addresses, select

Range, and enter the IP addresses in the Source IP fields. Click the Next button to continue. Click the

Previous button if you want to return to the previous screen. Click the Exit button if you want to exit the

Access Rule Setup Wizard.

Figure 6-114: Service

Figure 6-115: Log

Figure 6-116: Source

1 ... 89 90 91 ... 127

No comments

Cisco RV016 - Small Business - 10/100 VPN Router User's Guide Page 90