Cisco RVS4000 - Gigabit Security Router User's Guide download pdf (Page 59)

Gateway-to-Gateway VPN Tunnel

4-Port Gigabit Security Router with VPN

Appendix D

Configuration when the Remote Gateway

Uses a Dynamic IP Address

This example assumes the Remote Gateway is using a

dynamic IP address. If the Remote Gateway uses a static

IP address, refer to “Configuration when the Remote

Gateway Uses a Static IP.”

RVS4000

WAN: A.A.A.A

LAN: 192.168.5.1

RV082

Dynamic IP: B.B.B.B with

Domain Name: www.abc.com

LAN: 192.168.1.1

Gateway-to-Gateway IPSec VPN Tunnel - Remote Gateway Using

Dynamic IP

NOTE: Each computer must have a network

adapter installed.

Configuration of the RVS4000

Follow these instructions for the first VPN Router,

designated RVS4000. The other VPN Router is designated

the RV082.

Launch the web browser for a networked computer, 1.

designated PC 1.

Access the web-based utility of the RVS4000. (Refer to 2.

“Chapter 5: Setting Up and Configuring the Router” for

details.)

Click the3. VPN tab.

Click 4. IPSec VPN.

Enter a name in the 5. Tunnel Name field.

For the IPSec VPN Tunnel setting, select 6. Enable.

The WAN IP address (A.A.A.A) of the RVS4000 will be 7.

automatically detected.

For the Local Security Group Type, select Subnet. Enter

the RVS4000’s local network settings in the IP Address

and Subnet Mask fields.

RVS4000 IPSec VPN Settings

For the Remote Security Gateway Type, select8. IP by

DNS Resolved. Enter the RV082’s domain name in the

field provided.

For the Remote Security Group Type, select 9. Subnet.

Enter the RV082’s local network settings in the IP

Address and Subnet Mask fields.

In the IPSec Setup section, select the appropriate 10.

encryption, authentication, and other key management

settings.

In the 11. Preshared Key field, enter a string for this key, for

example, 13572468.

RVS4000 IPSec Setup Settings

If you need more detailed settings, click 12. Advanced

Settings. Otherwise, click Save Settings and proceed

to the next section, “Configuration of the RV082.”

Configuration of the RV082

Follow similar instructions for the RV082.

Launch the web browser for a networked computer, 1.

designated PC 2.

Access the Web-based Utility of the RV082. (Refer to 2.

the User Guide of the RV082 for details.)

Click the3. IPSec VPN tab.

Click the 4. Gateway to Gateway tab.

Enter a name in the 5. Tunnel Name field.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 82 83

Comments to this Manuals

No comments

Cisco RVS4000 - Gigabit Security Router User's Guide Page 59

Comments to this Manuals

Related products and manuals for Networking Cisco RVS4000 - Gigabit Security Router