Overview of the Cisco RPS 1-13
Safety with Electricity
Warning This product relies on the building’s installation for short-circuit (overcurrent)
protection. Make sure that a fuse or circuit breaker is no larger than 120 VAC, 15A U.S.
(240 VAC, 10A international) is used on the phase conductors (all current-carrying
conductors).
Warning This equipment is intended to be grounded. Make sure that the host is connected
to earth ground during normal use.
• Look carefully for possible hazards in your work area, such as moist floors, ungrounded
power extension cables, and missing safety grounds.
• If an electrical accident occurs, proceed as follows:
— Use caution; do not become a victim yourself.
— Turn off power to the Cisco RPS.
— If possible, send another person to get medical aid. Otherwise, determine the
condition of the victim and then call for help.
— Determine if the person needs rescue breathing or external cardiac compressions;
then take appropriate action.
Warning Ultimate disposal of this product should be handled according to all national
laws and regulations.
rps1 Page 13 Monday, September 14, 1998 8:17 AM
Comments to this Manuals