3-38
Cisco AS5800 Operations, Administration, Maintenance, and Provisioning Guide
DOC-7810814=
Chapter 3 Operations
Configuring PPP and Authentication
Timesaver For more information on this command, refer to Cisco IOS Switching Commands, available
online at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/switch_r/
Confirming the Final Running Configuration
After you complete the tasks in this section, the Cisco AS5800 final running configuration looks like the
following example:
5800-NAS# show running-config
Building configuration...
Current configuration:
!
version 12.x
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 5800-NAS
!
aaa new-model
aaa authentication login default local
aaa authentication ppp default if-needed local
enable secret 5 $1$LKgL$tgi19XvWn7fld7JGt55p01
!
username theuser password 7 045802150C2E
username admin password 7 044E1F050024
!
!
!
!
!
!
shelf-id 0 router-shelf
shelf-id 1 dial-shelf
!
!
!
resource-pool disable
!
modem-pool Default
pool-range 1/2/0-1/10/143
!
!
spe 1/2/0 1/10/11
firmware ios-bundled default
modem recovery action none
ip subnet-zero
no ip source-route
ip host aurora 172.22.100.9
ip domain-name the.doc
ip name-server 172.22.11.10
ip name-server 172.22.12.11
!
Comments to this Manuals