Cisco AS5800 Specifications download pdf (Page 190)

5-12

Cisco AS5800 Operations, Administration, Maintenance, and Provisioning Guide

DOC-7810814=

Chapter 5 Maintenance

Replacement Procedures

Step 5 Grasp the filter module handle and gently pull the filter module about halfway out of the dial-shelf

chassis. (See Figure 5-10.)

Figure 5-10 Removing and Replacing the Filter Module

Step 6

Holding the filter module handle with one hand, place your other hand under the module for support.

Step 7 Pull the filter module from the dial-shelf chassis and place it in an antistatic bag to return to the factory.

This completes the filter module removal process. Continue with Replacing the Filter Module.

Replacing the Filter Module

To replace the filter module, complete the following steps. When you are finished, use a Site Log sheet

to record service maintenance.

Step 1 Attach an ESD-preventive wrist strap between you and an unpainted chassis surface.

Step 2 Using both hands, gently push the new filter module into the dial-shelf chassis until it connects firmly

with the backplane.

Caution When inserting the filter module, avoid unnecessary force, which can damage the

connectors.

Step 3 Using a 1/4-in. flat-blade screwdriver, tighten the captive screws.

–48

–

POW

ISW

IRE

MISW

IRE

–

48V –4

H11075

Captive

screws

PEM

AC-input

power shelf

(optional)

PEM

Filter module

Captive

screws

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 333 334

No comments

Cisco AS5800 Specifications Page 190