Chapter 5. Configuring IP over InfiniBand for use with Cisco switches 93
3. Enter an IP address, subnet mask, and optionally a default gateway. Then, click OK as
shown in Figure 5-10.
Figure 5-10 Internet Protocol TCP/IP Properties menu
4. Click OK to apply the TCP/IP configuration.
5. Upon successful binding of IP address and subnet mask information to the interface ib0,
verify successful initialization of the ib0 interface from the command prompt using the
command ipconfig, as shown in Figure 5-11.
Figure 5-11 TCP/IP configuration for IPoIB Interface
Windows IP Configuration
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : raleigh.ibm.com
IP Address. . . . . . . . . . . . : 9.42.166.84
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 9.42.166.1
Ethernet adapter IP over InfiniBand Adapter 1 Port 2:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 169.254.31.5
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
Ethernet adapter IP over InfiniBand Adapter 1 Port 1:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 172.16.240.12
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
Comments to this Manuals