156 Implementing Cisco InfiniBand on IBM BladeCenter
7.7.2 For the 4948
Table 7-3 shows some useful commands for supporting an upstream Cisco IOS device (a
4948 in our example).
Table 7-3 IOS commands
Command Description
show run Shows the current running configuration of the 4948
show int status Shows a snap-shot of all of the ports on the system and their
status (connected/not connected, VLAN in use, speed, and so
forth)
show int trunk Shows information and status on any ports configured as 802.1Q
trunks
show etherchannel summary Shows information and status on any configured aggregation
groups
Comments to this Manuals