Cisco InfiniBand 4x User's Guide Page 117
- Page / 174
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 6. Boot from InfiniBand using the Cisco 3012 InfiniBand to FC gateway 103
To configure Fibre Channel SAN, follow these steps:
1. Configure Fibre Channel SAN implies for end-to-end connectivity, the WWPNs of blade,
storage, and Fibre Channel gateway are listed in the Name Server as shown in Figure 6-9.
Figure 6-9 FC Zoning: Active Zoneset view
2. When all the WWPNs are found in the Name Server database as shown in Figure 6-9,
configure the zones using the WWPNs (World Wide Port Names) that consist of the
following members
– Zone A: Fibre Channel Gateway port1 & Storage Controller Port(s)
– Zone B: Fibre Channel Gateway port2 & Storage Controller Port(s)
– Zone C: Blade HCA-port1 & Storage Controller Port(s)
Figure 6-10 lists the zoning implementation for this testing.
Figure 6-10 Active Zoneset View from the MDS9000 switch CLI
Note: For instructions about how to implement FC Zoning, refer to the FC switch User
Guide installed in your environment.
mds9124-A# show fcns database vsan 1
VSAN 1:
----------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
----------------------------------------------------------------------------
0x2c0000 N 20:25:00:a0:b8:26:12:10 (Symbios) scsi-fcp:target
0x2c0100 N 20:24:00:a0:b8:26:12:10 (Symbios) scsi-fcp:both
0x2c0200 N 20:14:00:a0:b8:26:12:10 (Symbios) scsi-fcp:both
0x2c0300 N 20:15:00:a0:b8:26:12:10 (Symbios) scsi-fcp:target
0x2c0401 N 20:00:00:05:ad:63:5b:b3 scsi-fcp
0x2c0402 N 20:01:00:05:ad:63:5b:b3 scsi-fcp
0x2c0404 N 20:02:00:05:ad:63:5b:b3 scsi-fcp
0x2c0501 N 20:00:00:05:ad:67:5b:b3 scsi-fcp
0x2c0502 N 20:01:00:05:ad:67:5b:b3 scsi-fcp
0x2c0504 N 20:02:00:05:ad:67:5b:b3 scsi-fcp
Total number of entries = 10
Storage
Controller
WWPNs
Blade and FC
gateway
WWPNs
mds9124-A# show zoneset active vsan 1
zoneset name IB-redpaper vsan 1
zone name DS4700-TS3012p2 vsan 1
* fcid 0x2c0501 [pwwn 20:00:00:05:ad:67:5b:b3]
* fcid 0x2c0200 [pwwn 20:14:00:a0:b8:26:12:10]
* fcid 0x2c0300 [pwwn 20:15:00:a0:b8:26:12:10]
* fcid 0x2c0404 [pwwn 20:02:00:05:ad:63:5b:b3]
* fcid 0x2c0502 [pwwn 20:01:00:05:ad:67:5b:b3]
zone name DS4700-TS3012p1 vsan 1
* fcid 0x2c0401 [pwwn 20:00:00:05:ad:63:5b:b3]
* fcid 0x2c0200 [pwwn 20:14:00:a0:b8:26:12:10]
* fcid 0x2c0300 [pwwn 20:15:00:a0:b8:26:12:10]
* fcid 0x2c0402 [pwwn 20:01:00:05:ad:63:5b:b3]
zone name Blade10-vhostp1-DS4700 vsan 1
* fcid 0x2c0404 [pwwn 20:02:00:05:ad:63:5b:b3]
* fcid 0x2c0200 [pwwn 20:14:00:a0:b8:26:12:10]
* fcid 0x2c0300 [pwwn 20:15:00:a0:b8:26:12:10]
FC gateway port 2 -
storage zone
FC gateway port 1 -
storage zone
Blade HCA port 1 -
storage zone
- Redpaper 1
- October 2007 3
- Contract with IBM Corp 4
- Contents 5
- Contents v 7
- Trademarks 10
- Become a published author 13
- Comments welcome 13
- IBM BladeCenter products and 15
- 1.1 BladeCenter chassis 16
- 1.2 Blade servers 19
- 4X InfiniBand networking only 27
- InfiniBand products for 29
- BladeCenter 29
- OK (Green) and Fault (Yellow) 38
- 2.6.2 InfiniBand DDR HCAs 39
- InfiniBand technology 45
- 3.1.1 Upper layer protocols 46
- 3.1.2 Transport layer 46
- 3.1.3 Network layer 47
- 3.1.4 Data link layer 47
- 3.1.5 Physical layer 48
- 12X Link 49
- 3.2.3 Storage RDMA Protocol 50
- 3.3 Hardware 52
- 3.4 Management 52
- 3.5 Common markets 53
- 3.5.1 Application clustering 54
- 3.5.3 Storage area networks 54
- Configuring InfiniBand with 55
- QLogic bridges 55
- 4.1.1 Installing the drivers 56
- 4.1.5 Hints and tips 74
- Figure 4-66 Active SRP Map 89
- Figure 4-67 Add Direct Map 90
- Figure 4-70 93
- 5.2.3 Configuring IPoIB 105
- Cisco 3012 InfiniBand to FC 109
- 6.2 Blade booting from a SAN 110
- Installing hardware 111
- Figure 6-6 Define SRP host 114
- 6.2.5 Configuring storage 118
- 6.2.6 Discovering storage 119
- 6.2.8 Port masking 120
- Loading SCSI driver 128
- Loading ts_srp_host driver 128
- Configuring the Cisco 3012 131
- 7.2 Client information 136
- 7.3.1 The design 137
- EGW = Ethernet Gateway Module 147
- BG1 = Bridge Group 1 147
- Blue = InfiniBand 147
- Green = Ethernet 147
- Int Po5 153
- Figure 7-25 164
- 7.7 Useful CLI commands 169
- 7.7.2 For the 4948 170
- Abbreviations and acronyms 171
- Related publications 173
- Online resources 174
- Help from IBM 174
Related products and manuals for Network switches Cisco InfiniBand 4x
Network switches Cisco MFEBX1 User Manual
(11 pages)
(11 pages)
Network switches Cisco TrustSec User Manual
(10 pages)
(10 pages)
Network switches Cisco MGBLX1 User Manual
(13 pages)
(13 pages)
© 2020, manymanuals.com. All rights reserved. | 0.186 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals