Cisco InfiniBand 4x User's Guide download pdf (Page 80)

66 Implementing Cisco InfiniBand on IBM BladeCenter

needed. However without the bridge module, you cannot ping a true Ethernet device—just

another InfiniBand interface running IP over InfiniBand. Follow these steps:

1. Windows finds the Open IPoIB Adapter. Select Install from a specific location and click

next.

2. Click the Browse button under Include this location in the search. Select the following

location and click OK:

C:\Program Files\SilverStorm\SilverStorm HCA\net

3. Click Next to continue the driver installation. The Wizard finds and installs the Open IPoIB

adapter.

4. Repeat steps 1 through 3 for the second IPoIB adapter. When the driver installation is

complete, you should see two entries for the IPoIB in device manager under Network

Adapters in Device Manager as shown in Figure 4-48.

Figure 4-48 IP over InfiniBand adapters in Device Manager

5. Inside windows Network Connections, you see two Local Area Connections, one for each

IPoIB interface, as shown in Figure 4-49.

Figure 4-49 IP over InfiniBand Adapters in Network Connections

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 173 174

No comments

Cisco InfiniBand 4x User's Guide Page 80