Cisco InfiniBand 4x User's Guide Page 118

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 117
104 Implementing Cisco InfiniBand on IBM BladeCenter
6.2.5 Configuring storage
To configure storage on the DS4000 storage subsystems, perform the following steps:
1. Define a Host Group.
2. Define a Host.
3. Define a Host Port.
4. Create a Logical Drive.
5. Map the Logical Drive.
Figure 6-11 displays the boot LUN mapped with LUN ID = 0 to the HS21 server defined as the
host under Host Group BoIB.
Figure 6-11 DS4000 Storage Manager: Mappings View list the boot LUN ID=0
This completes the Storage Configuration process for the Boot over InfiniBand.
Tip: The storage configuration procedure is different for different vendor products, but the
concept of host definition and LUN masking is generally the same. For detail instructions
about storage configuration, refer to the corresponding storage subsystem user guide.
Important: The boot LUN should always be mapped with the LUN ID = 0 because both
Windows and Linux operating systems configures the first logical drive it sees as the root
partition for Linux or C drive for Windows.
Boot LUN ID = 0
Page view 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 173 174

Comments to this Manuals

No comments