Cisco does not provide any kind of support for the third-party SFPs because they are not validated by
Cisco.
Note
Note
•
Supports only 100BASE SFPs and 1000BASE SFPs under two speed configurations:
•
100 Mbps speed for 100BASE SFPs
•
1000 Mbps speed for 1000BASE SFPs
•
Only the following routers and modules support third-party SFPs:
•
Cisco 2921 Integrated Services Router
•
Cisco 2951 Integrated Services Router
•
Cisco 3900 Integrated Services Router
•
Cisco 3900E Series Integrated Services Routers
•
Cisco 892-F Gigabit Ethernet Security Router
•
Cisco 898-EA Gigabit Ethernet Security Router
•
EHWIC-1GE-SFP
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
service unsupported-transceiver
4.
interface type slot/subslot/port number
5.
media-type sfp
6.
speed value
7.
shutdown
8.
no shutdown
9.
exit
DETAILED STEPS
PurposeCommand or Action
Enables the privileged EXEC mode.enable
Step 1
Example:
Router> enable
Enter your password if prompted.
Cisco 800 Series Integrated Services Routers Software Configuration Guide
124 OL-31704-02
Configuring Backup Data Lines and Remote Management
Configuring Third-Party SFPs
Comments to this Manuals