
Configuring 54g Protection
To set 54g protection, follow these steps from global configuration mode:
54g protection can be set only when 802.11n is disabled.Note
SUMMARY STEPS
1.
interface Dot11Radio 0
2.
54g-protection
DETAILED STEPS
PurposeCommand or Action
Enters radio interface mode, indicated by the ap(config-if)
prompt.
interface Dot11Radio 0
Example:
ap(config)# interface Dot11Radio 0
Step 1
Enables 54g protection.54g-protection
Step 2
Example:
ap(config-if)# 54g-protection
• 54g-protection—Enables the RTS/CTS protection
mechanism.
• no 54g-protection—Disables 54g protection.
Configuring the Multicast Rate
To set the multicast transmission rate, follow these steps from global configuration mode:
SUMMARY STEPS
1.
interface Dot11Radio 0
2.
multicast-rate {Mbps-rate | auto}
Cisco 800 Series Integrated Services Routers Software Configuration Guide
OL-31704-02 243
Configuring Wireless Devices
Configuring WLAN Using the CLI-based Interface
Comments to this Manuals